How does infrared sauna work?
Infrared heaters in the sauna emit FAR Infrared heat which is a narrow band of energy within the 5.6 to 15 micron level. This type of energy closely resembles the natural human spectrum so it’s easily absorbed by the body tissue.
The body reacts by sweating profusely which has many health benefits including detoxification, improved blood flow, circulation and weight loss.
Do SunRay Saunas emit EMF?
SunRay, unlike many manufacturers, does not use wires to conduct FAR Infrared heat, rather we apply the perfect thickness of ultra-conductive carbon to an epoxy resin panel activated by positive and negative copper strips on either side.
Laminating the epoxy resin panel results in ultra low EMF levels that are safe for continuous use.
How is the sauna packaged?
SunRay Saunas contain wooden panels that are pre-packaged in cardboard boxes and then placed on a wooden pallet to ensure the sauna arrives without damage.
You can remove the cardboard boxes from the pallet and they will fit through any door size 24” or greater.
Does the sauna come pre-assembled?
SunRay Saunas are not pre-assembled. Furthermore, they arrive in panels which are secured together with screws and metal latches. Assembly takes approximately one hour.
How long does it take to assemble the Sunray Barrett 1 Person Hemlock Sauna HL100K2?
Most sauna models take about an hour to assemble. Two people are required. For more information on the assembly of the unit please see the assembly instructions.
Do you need any special tools to assemble the sauna?
No, the only tool you need to assemble the sauna is a Philips head screwdriver or drill with a Philips head bit.
What voltage does the SSunray Aston 1 Person Indoor Traditional Sauna HL100TN run on?
All SunRay saunas use UL listed plugs and operate on 110V. Some larger saunas require a non-standard 20 amp plug and require a 20 amp circuit.
Can I place the sauna on the second floor?
Most saunas weigh between 300-400lbs. However, you can place a sauna on the second floor.
Can I use the Sunray Sauna outdoors?
All SunRay Saunas except the outdoor models must be used indoors. They are not suitable for outdoor use.
How do I clean the sauna?
First, unplug the sauna and make sure it is cool before cleaning. To clean the wooden interior of your sauna mix 3 teaspoons of baking soda into a gallon of warm water. Use a towel to wipe down the interior with the baking soda and water mixture.
Next, wipe the sauna down with a wet towel and let dry. You can clean the glass in your sauna with glass cleaner. If you have an outdoor sauna, use a standard garden hose on a low/mist setting to wash out the interior. Therefore make sure to leave the door open so the sauna can dry.
How often do I need to clean the sauna?
The sauna should be cleaned every 6 months or at your discretion if you are using it regularly. Sitting on a towel while in the sauna will capture a lot of sweat and thereby reduce the frequency of cleaning the sauna.